


1. Application:
GPS Tracker, MDVR, Tachograph, DTU, Telematics Devices
2. Features
1) Harsh Event Alarm with Accelerometer Data Output via RS232 Interface
Automatic Calibration for 6-axis G-Sensor
No special request for installation direction or vehicles.
Harsh Even Alarm:
Harsh Braking,
Harsh Acceleration
Harsh Cornering
Collision Alarm
Harsh Lane Departure Alarm
High Accuracy Vehicle Speed, Odometer with Ublox 8030 & Bosch 6-axis Inertia Navigation Technology
Programmable Threshold for G value of Alarms.(suggest default setting)
2) Interface
RS232 Output(default 115200 baud rates, 8-N-1, default 1Hz ):
Standard: NMEA0183 , like GNGGA, GNRMC, GNGSA, etc.
Private: Debug , GPATT with harsh event alarm data.
SMA connector for 1meter external GPS+Glonass Antenna
3) Size and Power Supply:
Build on high performance,low-power GNSS U-blox UBX-M8030-KT chipset
Support satellite systems: GPS, Glonass Galileo, Beidou
Ultra high track sensitivity: -167dBm
Baud rate:115200
Mini Size: 4.5cm(L)x1.9cm(W), 100cm extended cable
DC5V or DC12V
GPS Features:
Protocol compliant NMEA-0183, UBX, RTCM2.3
The built-in six-axis acceleration sensor can be used to define various gravity algorithms
Automatically inertial navigation positioning without GNSS signal
Built-in high gain LNA to improve receiving sensitivity
Automatically save GNSS log information
Operating voltage: 3.0V~5.5V
Power consumption: 140mA~150mA
Operating temperature range: -40to85°C
Patch Antenna Size:35x35x4mm
Small form factor: 55x50x18.4mm
Communication type: RS232
Wire interface type: Molex 4PIN , L=500CM
Waterproofing grade: IP41
RoHS compliant (Lead-free)
Please refer to Dashcam driving test video to learn more: https://youtu.be/jznXwexq3Bg